Collier huts: Difference between revisions

From Iron Allentown Wiki
Jump to navigation Jump to search
Aberg (talk | contribs)
→Location: information of hut door
Aberg (talk | contribs)
→Construction: log cots
Line 2: Line 2:


==Construction==
==Construction==
Collier huts were conical, with a base eight feet across and ten feet high. Three inch poles were used as the basic structure and the spaces between them were filled in with smaller poles. The basic structure was composed of wood, with leaves and soil acting as insulation by filling in the gaps between posts. Additionally, collier huts had a small door, a hearth, and wooden cots<ref>Kemper 1941, 8</ref>.
Collier huts were conical, with a base eight feet across and ten feet high. Three inch poles were used as the basic structure and the spaces between them were filled in with smaller poles. The basic structure was composed of wood, with leaves and soil acting as insulation by filling in the gaps between posts. Additionally, collier huts had a small door, a hearth, and cots constructed out of logs<ref>Kemper 1941, 8</ref>.


==Location==
==Location==

Revision as of 17:53, 10 April 2020

While producing charcoal, colliers stayed in temporary huts they constructed. Colliers tended to multiple charcoal hearths while they lived on the mountain. Each hearth took approximately two weeks to complete. A collier would mind a hearth closely for the first couple of days; after that, he would spend time starting a new hearth. Colliers could typically tend up to eight hearths at a time. Template:Citation needed

Construction

Collier huts were conical, with a base eight feet across and ten feet high. Three inch poles were used as the basic structure and the spaces between them were filled in with smaller poles. The basic structure was composed of wood, with leaves and soil acting as insulation by filling in the gaps between posts. Additionally, collier huts had a small door, a hearth, and cots constructed out of logs[1].

Location

A collier would construct his hut in a location as central to the charcoal pits he was burning as possible, and would have laid out the hut so that the door, which was large enough for one man to fit through, faced the pits[2] [3]. Throughout the charcoal production process, the charcoal hearths required constant tending throughout the day and night. If a collier let the fire consume his wood completely, he would be charged for its loss; so proximity to one's hearths was very important[4].

Notes

  1. ↑ Kemper 1941, 8
  2. ↑ Kemper 1941, 8
  3. ↑ Walker 1966, 242
  4. ↑ Walker 1966, 247

References

  • Kemper, Jackson. 1941. American Charcoal Making in the Era of the Cold-Blast Furnace. History 14. Washington, D.C.: U.S. Department of the Interior; National Park Service.
  • Walker, Joseph E. 1966. Hopewell Village; a Social and Economic History of an Iron-Making Community. Philadelphia,: Univ. of Pennsylvania Press.